High Density Cleaner
The high density cleaner consists of one top part fabricated from SS304 plate. Our High Density Cleaners (HDC) is large diameter forward cleaners capable of processing several hundred tons of fiber per day. This High Density Cleaner separates heavy contaminants from fibers in suspensions of fibers in water. This protects downstream equipment from excessive wear and damage.
A tangential inlet nozzle and one vertical outlet nozzle is provided on this. The nozzles are provided with secondary loose flanges for easy installation. One SS cone is attached to the top portion. Between this, one conical transparent glass is provided for viewing and controlling of the separation of rejected from the pulp. This glass is fitted in a MS chamber. This chamber is provided with a tube light at the rear side which enables the clear vision of separation. At the bottom, one SS reject collecting chamber is provided for the collection of rejected materials. This reject chamber is also provided with viewing glass which enables to see the quantity of reject collected. In between the separation zone and reject chamber quick operating valve is provided. This disconnects the flow of pulp from the separating zone to reject chamber when the cleaning of reject chamber is done. The reject chamber is provided with one tangential water inlet top control the separation of particles from the pulp, and one outlet for releasing the air to the time of starting of the equipment. The whole assembly is fitted to a MS fabricated stand for installation purposes.